OPC UA Interoperability Testing with OpcCmd: Difference between revisions

From OPC Labs Knowledge Base
 
(17 intermediate revisions by the same user not shown)
Line 1: Line 1:
[[Category:Interoperability]] [[Category:OPC UA]] [[Category:OpcCmd Utility]] [[Category:Testing]]
[[Category:Interoperability]] [[Category:OPC UA]] [[Category:OpcCmd Utility]] [[Category:Testing]]
This article is mainly for internal usage.
This article is mainly for internal usage.
Test preparation - example:
<code>!variable set endpoint opc.tcp://opcua.demo-this.com:51210/UA/SampleServer</code>
= Session =
= Session =
; CreateSession() over an insecure channel with UA TCP and SecurityPolicy =None
; CreateSession() over an insecure channel with UA TCP and SecurityPolicy =None
: Example: <code>uaClient read opc.tcp://opcua.demo-this.com:51210/UA/SampleServer i=2255 --EndpointAllowedMessagedSecurity SecurityNone</code>
: Example: <code>uaClient read %(endpoint) i=2255 --EndpointAllowedMessagedSecurity SecurityNone</code>
; CreateSession() over a secure channel with UA TCP and SecurityPolicy=Basic128Rsa15 where the key length is minimum 2048.
; CreateSession() over a secure channel with UA TCP and SecurityPolicy=Basic128Rsa15 where the key length is minimum 2048.
: Example: <code>uaClient read opc.tcp://opcua.demo-this.com:51210/UA/SampleServer i=2255 --EndpointSecurityPolicyDisplayName Basic128Rsa15</code>
: Example: <code>uaClient read %(endpoint) i=2255 --EndpointSecurityPolicyDisplayName Basic128Rsa15</code>
; ActivateSession() with user identity = username/password
; ActivateSession() with user identity = username/password
: Example: <code>uaClient read opc.tcp://opcua.demo-this.com:58810/GlobalDiscoveryServer i=2255 --EndpointUser appadmin:demo</code>
: Example: <code>uaClient read opc.tcp://opcua.demo-this.com:58810/GlobalDiscoveryServer i=2255 --EndpointUser appadmin:demo</code>
; ActivateSession() with user identity = anonymous
; ActivateSession() with user identity = anonymous
: Example: <code>uaClient read //opcua.demo-this.com:51210/UA/SampleServer i=2255 --EndpointAnonymous True</code>
: Example: <code>uaClient read %(endpoint) i=2255 --EndpointAnonymous True</code>
: However, the anonymous identity is the default, and as such is used in other tests unless other identity is explicitly specified.
: However, the anonymous identity is the default, and as such is used in other tests unless other identity is explicitly specified.
; ActivateSession - change user in an existing session.
; ActivateSession - change user in an existing session.
Line 16: Line 20:
: Example:
: Example:
: <code>uaClient --!option AmbientOutput=[Boolean]True --ConnectionMonitoring</code>
: <code>uaClient --!option AmbientOutput=[Boolean]True --ConnectionMonitoring</code>
: <code>read opc.tcp://opcua.demo-this.com:51210/UA/SampleServer i=2255</code>
: <code>read %(endpoint) i=2255</code>
: <code>!wait 00:00:15 --allowUserBreak False</code>
: <code>!option UserBreak [Boolean]False</code>
: <code>!wait 00:00:15</code>
: <code>exit</code>
: <code>exit</code>
; Create and use multiple sessions.
; Create and use multiple sessions.
Line 23: Line 28:
: <code>!option AmbientOutput [Boolean]True</code>
: <code>!option AmbientOutput [Boolean]True</code>
: <code>uaClient --ConnectionMonitoring</code>
: <code>uaClient --ConnectionMonitoring</code>
: <code>getService uaClientConnectionControl lockConnection //opcua.demo-this.com:51210/UA/SampleServer</code>
: <code>getService uaClientConnectionControl lockConnection %(endpoint)</code>
: <code>\uaClient --ConnectionMonitoring read //opcua.demo-this.com:51210/UA/SampleServer i=2255</code>
: <code>/uaClient --ConnectionMonitoring read %(endpoint) i=2255</code>
: <code>exit</code>
: <code>exit</code>
; CreateSession() with an application instance certificate
; CreateSession() with an application instance certificate
: Example: <code>uaClient read opc.tcp://opcua.demo-this.com:51210/UA/SampleServer i=2255 --EndpointAllowedMessagedSecurity Secure</code>
: Example: <code>uaClient read %(endpoint) i=2255 --EndpointAllowedMessagedSecurity Secure</code>
; CreateSession() over a secure channel with HTTPS and SecurityPolicy =None.
; CreateSession() over a secure channel with HTTPS and SecurityPolicy =None.
: Example: <code>uaClient read https://opcua.demo-this.com:51212/UA/SampleServer i=2255 --EndpointAllowedMessagedSecurity SecurityNone</code>
: Example: <code>uaClient read https://opcua.demo-this.com:51212/UA/SampleServer i=2255 --EndpointAllowedMessagedSecurity SecurityNone</code>
; ActivateSession() with user identity = X509 certificate
; ActivateSession() with user identity = X509 certificate
: Example: <code>uaClient read //opcua.demo-this.com:51210/UA/SampleServer i=2255 --EndpointCertificateFileName MyCertificate.pfx</code>
: Example: <code>uaClient read %(endpoint) i=2255 --EndpointCertificateFileName MyCertificate.pfx</code>
; CreateSession() over a secure channel with UA TCP and SecurityPolicy=Basic256Sha256
; CreateSession() over a secure channel with UA TCP and SecurityPolicy=Basic256Sha256
: Example: <code>uaClient read opc.tcp://opcua.demo-this.com:51210/UA/SampleServer i=2255 --EndpointSecurityPolicyDisplayName Basic256Sha256</code>
: Example: <code>uaClient read %(endpoint) i=2255 --EndpointSecurityPolicyDisplayName Basic256Sha256</code>
; CreateSession() over a secure channel with UA TCP and SecurityPolicy=Aes128-Sha256-RsaOaep
; CreateSession() over a secure channel with UA TCP and SecurityPolicy=Aes128-Sha256-RsaOaep
: Example: <code>uaClient read opc.tcp://opcua.demo-this.com:51210/UA/SampleServer i=2255 --EndpointSecurityPolicyDisplayName Aes128-Sha256-RsaOaep</code>
: Example: <code>uaClient read %(endpoint) i=2255 --EndpointSecurityPolicyDisplayName Aes128-Sha256-RsaOaep</code>
; CreateSession() over a secure channel with UA TCP and SecurityPolicy=Aes256-Sha256-RsaPss
; CreateSession() over a secure channel with UA TCP and SecurityPolicy=Aes256-Sha256-RsaPss
: Example: <code>uaClient read opc.tcp://opcua.demo-this.com:51210/UA/SampleServer i=2255 --EndpointSecurityPolicyDisplayName Aes256-Sha256-RsaPss</code>
: Example: <code>uaClient read %(endpoint) i=2255 --EndpointSecurityPolicyDisplayName Aes256-Sha256-RsaPss</code>
; ActivateSession() with user identity = Issued Token - OAuth2
; ActivateSession() with user identity = Issued Token - OAuth2
: (tbd)
: (tbd)
Line 57: Line 62:
= View Services =
= View Services =
; Call Browse() on a single node in the address space. Repeat with other nodes.
; Call Browse() on a single node in the address space. Repeat with other nodes.
: Example: <code>uaClient browse //opcua.demo-this.com:51210/UA/SampleServer</code>
: Example: <code>uaClient browse %(endpoint)</code>
: Example: <code>uaClient browse //opcua.demo-this.com:51210/UA/SampleServer --NodeStandardName Objects</code>
: Example: <code>uaClient browse %(endpoint) --NodeStandardName Objects</code>
; Call Browse() by specifying more than one node in a single call. Walk through the address space.
; Call Browse() by specifying more than one node in a single call. Walk through the address space.
: Specifying more than one node in a single call: Not supported (by OpcCmd).
: Specifying more than one node in a single call: Not supported (by OpcCmd).
: Example - Walk through the address space:
: Example - Walk through the address space:
: <code>uaClient browse //opcua.demo-this.com:51210/UA/SampleServer --BrowseParametersStandardName AllHierarchicalReferences --tree</code>
: <code>uaClient browse %(endpoint) --BrowseParametersStandardName AllHierarchicalReferences --tree</code>
; Call Browse() using various Reference filters; e.g. only hierarchical references.
; Call Browse() using various Reference filters; e.g. only hierarchical references.
: Example: <code>uaClient browse //opcua.demo-this.com:51210/UA/SampleServer --BrowseParametersStandardName AllHierarchicalReferences</code>
: Example: <code>uaClient browse %(endpoint) --BrowseParametersStandardName AllHierarchicalReferences</code>
: Example: <code>uaClient browse //opcua.demo-this.com:51210/UA/SampleServer --NodeStandardName Objects --BrowseParametersStandardName AllHierarchicalReferences</code>
: Example: <code>uaClient browse %(endpoint) --NodeStandardName Objects --BrowseParametersStandardName AllHierarchicalReferences</code>
; Call Browse() using various NodeClass filters (e.g. to return Variable nodes only).
; Call Browse() using various NodeClass filters (e.g. to return Variable nodes only).
: Example: <code>uaClient browse //opcua.demo-this.com:51210/UA/SampleServer --NodeStandardName Server --NodeClasses Variable</code>
: Example: <code>uaClient browse %(endpoint) --NodeStandardName Server --NodeClasses Variable</code>
: Example: <code>uaClient browse //opcua.demo-this.com:51210/UA/SampleServer --NodeStandardName Server --BrowseParametersStandardName DataNodes</code>
: Example: <code>uaClient browse %(endpoint) --NodeStandardName Server --BrowseParametersStandardName DataNodes</code>
; Call Browse() with a filter to reduce the result information (e.g. omit BrowseName and ReferenceType).
; Call Browse() with a filter to reduce the result information (e.g. omit BrowseName and ReferenceType).
: Not supported (by API).
: Not supported (by API).
Line 75: Line 80:
: <code>uaClient</code>
: <code>uaClient</code>
: <code>set IsolatedParameters.SessionParameters.MaximumReferencesPerBrowseNode [Int32]1</code>
: <code>set IsolatedParameters.SessionParameters.MaximumReferencesPerBrowseNode [Int32]1</code>
: <code>browse //opcua.demo-this.com:51210/UA/SampleServer --NodeStandardName Server</code>
: <code>browse %(endpoint) --NodeStandardName Server</code>
: <code>exit</code>
: <code>exit</code>
; TranslateBrowsePathToNodeId to determine the NodeID of components (e.g. properties)
; TranslateBrowsePathToNodeId to determine the NodeID of components (e.g. properties)
: Example: <code>uaClient read //opcua.demo-this.com:51210/UA/SampleServer --NodeBrowsePath [Server]/0:NamespaceArray</code>
: Example: <code>uaClient read %(endpoint) --NodeBrowsePath [Server]/0:NamespaceArray</code>
; [obsolete] TranslateBrowsePathToNodeId for non-hierarchical References
; [obsolete] TranslateBrowsePathToNodeId for non-hierarchical References
: Not supported (no test due to obsolescence).
: Not supported (no test due to obsolescence).
Line 86: Line 91:
: <code>uaClient</code>
: <code>uaClient</code>
: <code>:: Lock the connection so that the node registration takes effect immediately.</code>
: <code>:: Lock the connection so that the node registration takes effect immediately.</code>
: <code>getService uaClientConnectionControl lockConnection //opcua.demo-this.com:51210/UA/SampleServer</code>
: <code>getService uaClientConnectionControl lockConnection %(endpoint)</code>
: <code>getService uaClientNodeRegistration registerNode //opcua.demo-this.com:51210/UA/SampleServer --NodeStandardName Server_ServerDiagnostics_ServerDiagnosticsSummary_CumulatedSessionCount</code>
: <code>getService uaClientNodeRegistration registerNode %(endpoint) --NodeStandardName Server_ServerDiagnostics_ServerDiagnosticsSummary_CumulatedSessionCount</code>
: <code>!variable let registrationHandle %~</code>
: <code>!variable let registrationHandle %~</code>
: <code>!wait 00:00:05 --allowUserBreak False</code>
: <code>!option UserBreak [Boolean]False</code>
: <code>read //opcua.demo-this.com:51210/UA/SampleServer --NodeStandardName Server_ServerDiagnostics_ServerDiagnosticsSummary_CumulatedSessionCount</code>
: <code>!wait 00:00:05</code>
: <code>read %(endpoint) --NodeStandardName Server_ServerDiagnostics_ServerDiagnosticsSummary_CumulatedSessionCount</code>
: <code>getService uaClientNodeRegistration unregisterNode %(registrationHandle)</code>
: <code>getService uaClientNodeRegistration unregisterNode %(registrationHandle)</code>
: <code>exit</code>
: <code>exit</code>
Line 100: Line 106:
: <code>uaClient</code>
: <code>uaClient</code>
: <code>:: Lock the connection so that the node registration takes effect immediately.</code>
: <code>:: Lock the connection so that the node registration takes effect immediately.</code>
: <code>getService uaClientConnectionControl lockConnection //opcua.demo-this.com:51210/UA/SampleServer</code>
: <code>getService uaClientConnectionControl lockConnection %(endpoint)</code>
: <code>getService uaClientNodeRegistration registerNode //opcua.demo-this.com:51210/UA/SampleServer nsu=http://samples.org/UA/memorybuffer/Instance;s=UInt32[0]</code>
: <code>getService uaClientNodeRegistration registerNode %(endpoint) nsu=http://samples.org/UA/memorybuffer/Instance;s=UInt32[0]</code>
: <code>!variable let registrationHandle %~</code>
: <code>!variable let registrationHandle %~</code>
: <code>!wait 00:00:05 --allowUserBreak False</code>
: <code>!option UserBreak [Boolean]False</code>
: <code>read //opcua.demo-this.com:51210/UA/SampleServer nsu=http://samples.org/UA/memorybuffer/Instance;s=UInt32[0]</code>
: <code>!wait 00:00:05</code>
: <code>read %(endpoint) nsu=http://samples.org/UA/memorybuffer/Instance;s=UInt32[0]</code>
: <code>getService uaClientNodeRegistration unregisterNode %(registrationHandle)</code>
: <code>getService uaClientNodeRegistration unregisterNode %(registrationHandle)</code>
: <code>exit</code>
: <code>exit</code>
Line 115: Line 122:
; Read() attributes - as supported by the Client - for a standard UA-defined node (e.g. "Server"). Repeat with other nodes.
; Read() attributes - as supported by the Client - for a standard UA-defined node (e.g. "Server"). Repeat with other nodes.
: Example:
: Example:
: <code>uaClient read opc.tcp://opcua.demo-this.com:51210/UA/SampleServer --NodeStandardName Server_ServerStatus_State</code>
: <code>uaClient read %(endpoint) --NodeStandardName Server_ServerStatus_State</code>
: <code>uaClient read opc.tcp://opcua.demo-this.com:51210/UA/SampleServer --NodeStandardName Server_ServerDiagnostics_EnabledFlag</code>
: <code>uaClient read %(endpoint) --NodeStandardName Server_ServerDiagnostics_EnabledFlag</code>
: <code>uaClient read opc.tcp://opcua.demo-this.com:51210/UA/SampleServer --NodeStandardName Server_ServerStatus</code>
: <code>uaClient read %(endpoint) --NodeStandardName Server_ServerStatus</code>
; Read() all supported attributes for a given vendor node in a single call. Vary the vendor nodes.
; Read() all supported attributes for a given vendor node in a single call. Vary the vendor nodes.
: Example:  
: Example:  
: <code>uaClient read opc.tcp://opcua.demo-this.com:51210/UA/SampleServer ns=2;i=10219 multiple --attributeId *</code>
: <code>uaClient read %(endpoint) ns=2;i=10219 multiple --attributeId *</code>
: <code>uaClient read opc.tcp://opcua.demo-this.com:51210/UA/SampleServer ns=2;i=10854 multiple --attributeId *</code>
: <code>uaClient read %(endpoint) ns=2;i=10854 multiple --attributeId *</code>
; Read() all supported attributes on a given node while specifying a MaxAge value.
; Read() all supported attributes on a given node while specifying a MaxAge value.
: Example:  
: Example:  
: <code>uaClient read opc.tcp://opcua.demo-this.com:51210/UA/SampleServer ns=2;i=10219 --MaximumAge 1000 multiple --attributeId *</code>
: <code>uaClient read %(endpoint) ns=2;i=10219 --MaximumAge 1000 multiple --attributeId *</code>
: <code>uaClient read opc.tcp://opcua.demo-this.com:51210/UA/SampleServer ns=2;i=10854 --MaximumAge 1000 multiple --attributeId *</code>
: <code>uaClient read %(endpoint) ns=2;i=10854 --MaximumAge 1000 multiple --attributeId *</code>
; Read() the value attribute while specifying an encoding (not "default"). Vary the encoding.
; Read() the value attribute while specifying an encoding (not "default"). Vary the encoding.
: Not supported (by API).
: Not supported (by API).
; Read() a value that is an array while varying the IndexRange to include specific indexes, the first X, the last X, the middle X. Vary the number of dimensions (e.g. "1&#x003A;2,1&#x003A;2" or "1&#x003A;2,1&#x003A;2,1&#x003A;2" etc.) - if available.
; Read() a value that is an array while varying the IndexRange to include specific indexes, the first X, the last X, the middle X. Vary the number of dimensions (e.g. "1&#x003A;2,1&#x003A;2" or "1&#x003A;2,1&#x003A;2,1&#x003A;2" etc.) - if available.
: Example:
: Example:
: <code>uaClient read //opcua.demo-this.com:51210/UA/SampleServer i=2255 Value 0:1</code>
: <code>uaClient read %(endpoint) i=2255 Value 0:1</code>
: <code>uaClient read //opcua.demo-this.com:51210/UA/SampleServer "nsu=http://test.org/UA/Data/ ;ns=2;i=10303" Value 2</code>
: <code>uaClient read %(endpoint) "nsu=http://test.org/UA/Data/ ;ns=2;i=10303" Value 2</code>
: <code>uaClient read //opcua.demo-this.com:51210/UA/SampleServer "nsu=http://test.org/UA/Data/ ;ns=2;i=10303" Value 1:2,1:2</code>
: <code>uaClient read %(endpoint) "nsu=http://test.org/UA/Data/ ;ns=2;i=10303" Value 1:2,1:2</code>
: <code>uaClient read //opcua.demo-this.com:51210/UA/SampleServer "nsu=http://test.org/UA/Data/ ;ns=2;i=10939" Value 1:2</code>
: <code>uaClient read %(endpoint) "nsu=http://test.org/UA/Data/ ;ns=2;i=10939" Value 1:2</code>
: <code>uaClient read //opcua.demo-this.com:51210/UA/SampleServer "nsu=http://test.org/UA/Data/ ;ns=2;i=10939" Value 1:2,1:2</code>
: <code>uaClient read %(endpoint) "nsu=http://test.org/UA/Data/ ;ns=2;i=10939" Value 1:2,1:2</code>
; Write() one or more Value attributes (WriteAccess permitted) for one or more nodes in a single call. Vary nodes.
; Write() one or more Value attributes (WriteAccess permitted) for one or more nodes in a single call. Vary nodes.
: Example:
: Example:
: <code>uaClient write //opcua.demo-this.com:51210/UA/SampleServer nsu=http://test.org/UA/Data/;i=10221 [Int32]3141</code>
: <code>uaClient write %(endpoint) nsu=http://test.org/UA/Data/;i=10221 [Int32]3141</code>
: <code>uaClient read //opcua.demo-this.com:51210/UA/SampleServer nsu=http://test.org/UA/Data/;i=10221</code>
: <code>uaClient read %(endpoint) nsu=http://test.org/UA/Data/;i=10221</code>
: <code>uaClient write //opcua.demo-this.com:51210/UA/SampleServer nsu=http://test.org/UA/Data/;i=10474 [String[]]{first,second,third}</code>
: <code>uaClient write %(endpoint) nsu=http://test.org/UA/Data/;i=10474 [String[]]{first,second,third}</code>
: <code>uaClient read //opcua.demo-this.com:51210/UA/SampleServer nsu=http://test.org/UA/Data/;i=10474</code>
: <code>uaClient read %(endpoint) nsu=http://test.org/UA/Data/;i=10474</code>
; Write() a value that is an array using the IndexRange to vary the number of elements, e.g. all, first X, last X, middle X. Repeat for multi-dimension arrays, if available.
; Write() a value that is an array using the IndexRange to vary the number of elements, e.g. all, first X, last X, middle X. Repeat for multi-dimension arrays, if available.
: Example:
: Example:
: <code>uaClient write //opcua.demo-this.com:51210/UA/SampleServer nsu=http://test.org/UA/Data/;i=10302 [Byte[]]{42,43,44} Value 2:4</code>
: <code>uaClient write %(endpoint) nsu=http://test.org/UA/Data/;i=10302 [Byte[]]{42,43,44} Value 2:4</code>
: <code>uaClient read //opcua.demo-this.com:51210/UA/SampleServer nsu=http://test.org/UA/Data/;i=10302</code>
: <code>uaClient read %(endpoint) nsu=http://test.org/UA/Data/;i=10302</code>
: <code>uaClient write //opcua.demo-this.com:51210/UA/SampleServer nsu=http://test.org/UA/Data/;i=10474 [String[]]{first,second,third}</code>
: <code>uaClient write %(endpoint) nsu=http://test.org/UA/Data/;i=10474 [String[]]{first,second,third}</code>
: <code>uaClient write //opcua.demo-this.com:51210/UA/SampleServer nsu=http://test.org/UA/Data/;i=10474 [String[]]{new2} Value 1</code>
: <code>uaClient write %(endpoint) nsu=http://test.org/UA/Data/;i=10474 [String[]]{new2} Value 1</code>
: <code>uaClient read //opcua.demo-this.com:51210/UA/SampleServer nsu=http://test.org/UA/Data/;i=10474</code>
: <code>uaClient read %(endpoint) nsu=http://test.org/UA/Data/;i=10474</code>
; Read() a Value that is a structured DataType, use vendor specific structures if possible.
; Read() a Value that is a structured DataType, use vendor specific structures if possible.
: (tbd)
: (tbd)
Line 155: Line 162:
= Method Services =
= Method Services =
; Call() a method defined by the vendor (not any of the OPC UA defined methods). Vary the methods to ensure different method signatures are covered, e.g. no parameters, in-parameters only, out-parameters only, in and out parameters etc.
; Call() a method defined by the vendor (not any of the OPC UA defined methods). Vary the methods to ensure different method signatures are covered, e.g. no parameters, in-parameters only, out-parameters only, in and out parameters etc.
: Example: <code>uaClient call //opcua.demo-this.com:51210/UA/SampleServer nsu=http://test.org/UA/Data/;i=10755 nsu=http://test.org/UA/Data/;i=10756 [Boolean]False [SByte]1 [Byte]2 [Int16]3 [UInt16]4 [Int32]5 [UInt32]6 [Int64]7 [UInt64]8 [Float]9 [Double]10</code>
: Example: <code>uaClient call %(endpoint) nsu=http://test.org/UA/Data/;i=10755 nsu=http://test.org/UA/Data/;i=10756 [Boolean]False [SByte]1 [Byte]2 [Int16]3 [UInt16]4 [Int32]5 [UInt32]6 [Int64]7 [UInt64]8 [Float]9 [Double]10</code>
; Call() a Method that uses a structured DataType as Input- or Output-Arguments, use a Method with a vendor specific structure if possible.
; Call() a Method that uses a structured DataType as Input- or Output-Arguments, use a Method with a vendor specific structure if possible.
: (tbd)
: (tbd)
Line 162: Line 169:
; Browse() for standard folders&#x003A; Objects, Types, ReferenceTypes, ObjectTypes, VariableTypes, DataTypes, and Views.
; Browse() for standard folders&#x003A; Objects, Types, ReferenceTypes, ObjectTypes, VariableTypes, DataTypes, and Views.
: Example:
: Example:
: <code>uaClient browse //opcua.demo-this.com:51210/UA/SampleServer --NodeStandardName ObjectsFolder</code>
: <code>uaClient browse %(endpoint) --NodeStandardName ObjectsFolder</code>
: <code>uaClient browse //opcua.demo-this.com:51210/UA/SampleServer --NodeStandardName TypesFolder</code>
: <code>uaClient browse %(endpoint) --NodeStandardName TypesFolder</code>
: <code>uaClient browse //opcua.demo-this.com:51210/UA/SampleServer --NodeStandardName ReferenceTypesFolder</code>
: <code>uaClient browse %(endpoint) --NodeStandardName ReferenceTypesFolder</code>
: <code>uaClient browse //opcua.demo-this.com:51210/UA/SampleServer --NodeStandardName ObjectTypesFolder</code>
: <code>uaClient browse %(endpoint) --NodeStandardName ObjectTypesFolder</code>
: <code>uaClient browse //opcua.demo-this.com:51210/UA/SampleServer --NodeStandardName VariableTypesFolder</code>
: <code>uaClient browse %(endpoint) --NodeStandardName VariableTypesFolder</code>
: <code>uaClient browse //opcua.demo-this.com:51210/UA/SampleServer --NodeStandardName DataTypesFolder</code>
: <code>uaClient browse %(endpoint) --NodeStandardName DataTypesFolder</code>
: <code>uaClient browse //opcua.demo-this.com:51210/UA/SampleServer --NodeStandardName ViewsFolder</code>
: <code>uaClient browse %(endpoint) --NodeStandardName ViewsFolder</code>
; Browse() the Types folder and verify standard types are exposed, e.g. BaseObjectType, FolderType, Reference Types, Data Types (scalar types and standard structures).
; Browse() the Types folder and verify standard types are exposed, e.g. BaseObjectType, FolderType, Reference Types, Data Types (scalar types and standard structures).
: Example:
: Example:
: <code>uaClient browse //opcua.demo-this.com:51210/UA/SampleServer --NodeStandardName TypesFolder --BrowseDirections Forward --ReferenceTypeId i=35 --ReferenceTypeId i=45 --tree</code>
: <code>uaClient browse %(endpoint) --NodeStandardName TypesFolder --BrowseDirections Forward --ReferenceTypeId i=35 --ReferenceTypeId i=45 --tree</code>
; Browse() the Server Object for ServerCapabilities, ServerDiagnostics, ServerStatus, VendorServerInfo, and any other standardized components.
; Browse() the Server Object for ServerCapabilities, ServerDiagnostics, ServerStatus, VendorServerInfo, and any other standardized components.
: Example:
: Example:
: <code>uaClient browse //opcua.demo-this.com:51210/UA/SampleServer --NodeStandardName Server</code>
: <code>uaClient browse %(endpoint) --NodeStandardName Server</code>
; Browse() the ServerDiagnostics.SessionDiagnosticsArray and verify the Client connection and its details can be read
; Browse() the ServerDiagnostics.SessionDiagnosticsArray and verify the Client connection and its details can be read
: Example:
: Example:
: <code>uaClient browse //opcua.demo-this.com:51210/UA/SampleServer --NodeStandardName Server_ServerDiagnostics</code>
: <code>uaClient browse %(endpoint) --NodeStandardName Server_ServerDiagnostics</code>
: <code>uaClient browse //opcua.demo-this.com:51210/UA/SampleServer --NodeStandardName Server_ServerDiagnostics_SessionsDiagnosticsSummary</code>
: <code>uaClient browse %(endpoint) --NodeStandardName Server_ServerDiagnostics_SessionsDiagnosticsSummary</code>
: <code>uaClient read //opcua.demo-this.com:51210/UA/SampleServer --NodeStandardName Server_ServerDiagnostics_SessionsDiagnosticsSummary_SessionDiagnosticsArray</code>
: <code>uaClient read %(endpoint) --NodeStandardName Server_ServerDiagnostics_SessionsDiagnosticsSummary_SessionDiagnosticsArray</code>


= Subscription Services =
= Subscription Services =
Line 189: Line 196:
: Example:
: Example:
: <code>!diagnostics sources setSwitchValue Verbose OpcLabs.EasyOpc.UA.UAClientSession</code>
: <code>!diagnostics sources setSwitchValue Verbose OpcLabs.EasyOpc.UA.UAClientSession</code>
: <code>uaClient subscribe //opcua.demo-this.com:51210/UA/SampleServer nsu=http://test.org/UA/Data/;i=10849 !wait 5000 --allowUserBreak False</code>
: <code>!option UserBreak [Boolean]False</code>
: <code>uaClient subscribe %(endpoint) nsu=http://test.org/UA/Data/;i=10849 !wait 5000</code>
: <code>traceEntries?</code>
: <code>traceEntries?</code>
: In the trace entries, look for an entry from "UAClientSession" indicating SDK subscription remove success or failure.
: In the trace entries, look for an entry from "UAClientSession" indicating SDK subscription remove success or failure.
Line 200: Line 208:
: <code>uaClient</code>
: <code>uaClient</code>
: <code>set IsolatedParameters.SubscriptionParameters.KeepAliveCount [Int32]1</code>
: <code>set IsolatedParameters.SubscriptionParameters.KeepAliveCount [Int32]1</code>
: <code>subscribe //opcua.demo-this.com:51210/UA/SampleServer nsu=http://test.org/UA/Data/;i=10393</code>
: <code>subscribe %(endpoint) nsu=http://test.org/UA/Data/;i=10393</code>
: If the keep-alive fails, there would be an additional event with the error
: If the keep-alive fails, there would be an additional event with the error
; Issue multiple Publish() requests that are to be queued by the Server.
; Issue multiple Publish() requests that are to be queued by the Server.
Line 208: Line 216:
; Create subscriptions with varying number of monitored items and different rate settings as supported by the client. Verify that the server provides updates according to the specified publishing rate. Optionally use Write() service to trigger data changes.
; Create subscriptions with varying number of monitored items and different rate settings as supported by the client. Verify that the server provides updates according to the specified publishing rate. Optionally use Write() service to trigger data changes.
: Example:
: Example:
: <code>uaClient subscribe //opcua.demo-this.com:51210/UA/SampleServer nsu=http://test.org/UA/Data/;i=10849 --Aggregates StateStatistics multiple</code>
: <code>uaClient subscribe %(endpoint) --NodeStandardName Server_ServerStatus_CurrentTime --Aggregates StateStatistics</code>
: <code>uaClient subscribe //opcua.demo-this.com:51210/UA/SampleServer nsu=http://test.org/UA/Data/;i=10849 200 --Aggregates StateStatistics multiple</code>
: <code>uaClient subscribe %(endpoint) nsu=http://test.org/UA/Data/;i=10849 --Aggregates StateStatistics multiple</code>
: <code>uaClient subscribe %(endpoint) nsu=http://test.org/UA/Data/;i=10849 200 --Aggregates StateStatistics multiple</code>


= Redundancy =
= Redundancy =
Line 226: Line 235:
; [obsolete] Publish Service delivers event notifications matching the filter.
; [obsolete] Publish Service delivers event notifications matching the filter.
: Not supported (by OpcCmd).
: Not supported (by OpcCmd).
; ? (EventNodes_Browse)
; Browse the address space for other nodes that support event subscriptions (other than the Server object). Subscribe to any of these.
: Example:
: Example:
: <code>uaClient browse //opcua.demo-this.com:51210/UA/SampleServer --NodeStandardName Server --BrowseDirections Forward --ReferenceTypeId i=36 --tree</code>
: <code>uaClient browse %(endpoint) --NodeStandardName Server --BrowseDirections Forward --ReferenceTypeId i=36 --tree</code>
 
; Receiving all supported Audit events
Browse the address space for other nodes that support event subscriptions (other than the Server object). Subscribe to any of these.
: (tbd)
 
Receiving all supported Audit events


= Data Change =
= Data Change =
; Add Monitored Items (value attribute of variables)
; Add Monitored Items (value attribute of variables)
: Example:
: Example:
: <code>uaClient subscribe //opcua.demo-this.com:51210/UA/SampleServer nsu=http://test.org/UA/Data/;i=10849 multiple --repeat 2</code>
: <code>uaClient subscribe %(endpoint) nsu=http://test.org/UA/Data/;i=10849 multiple --repeat 2</code>
; Modify the state of One or more monitored items in a single SetMonitoringMode() call, e.g. disabled, reporting, or sampling.
; Modify the state of One or more monitored items in a single SetMonitoringMode() call, e.g. disabled, reporting, or sampling.
: Not supported (by API).
: Not supported (by API).
Line 246: Line 253:
; Absolute Deadband filter.
; Absolute Deadband filter.
: Example:
: Example:
: <code>uaClient subscribe //opcua.demo-this.com:51210/UA/SampleServer nsu=http://test.org/UA/Data/;i=10853 200 --DeadbandType Absolute --DeadbandValue 1E10</code>
: <code>uaClient subscribe %(endpoint) nsu=http://test.org/UA/Data/;i=10853 200 --DeadbandType Absolute --DeadbandValue 1E10</code>
; Modify an existing trigger (SetTriggering()) by adding/removing items to/from the trigger. Verify behavior.
; Modify an existing trigger (SetTriggering()) by adding/removing items to/from the trigger. Verify behavior.
: Not supported (by API).
: Not supported (by API).
Line 263: Line 270:
; Browse() the Types folder for supported Alarm types and Condition types.
; Browse() the Types folder for supported Alarm types and Condition types.
: Example:
: Example:
: <code>uaClient browse //opcua.demo-this.com:51210/UA/SampleServer --NodeStandardName BaseEventType --BrowseDirections Forward --ReferenceTypeId i=45 --tree</code>
: <code>uaClient browse %(endpoint) --NodeStandardName BaseEventType --BrowseDirections Forward --ReferenceTypeId i=45 --tree</code>
; Call CreateMonitoredItems() for an Event Notifier. Specify event fields to be returned. Specify a simple filter (e.g. if (Severity > 400)). Vary the selection and the filter.
; Call CreateMonitoredItems() for an Event Notifier. Specify event fields to be returned. Specify a simple filter (e.g. if (Severity > 400)). Vary the selection and the filter.
: Not supported (by OpcCmd).
: Not supported (by OpcCmd).
Line 313: Line 320:
; Call GetEndpoints() on the Server application that is the testee.
; Call GetEndpoints() on the Server application that is the testee.
: Example:
: Example:
: <code>uaClient read //opcua.demo-this.com:51210/UA/SampleServer --NodeStandardName Server_ServerCapabilities_MaxArrayLength</code>
: <code>uaClient read %(endpoint) --NodeStandardName Server_ServerCapabilities_MaxArrayLength</code>
: The ability to create a session in this way is a proof of test success here
: The ability to create a session in this way is a proof of test success here


Line 322: Line 329:
: Example:
: Example:
: <code>!diagnostics sources setSwitchValue Verbose OpcLabs.EasyOpc.UA.UAClientSession</code>
: <code>!diagnostics sources setSwitchValue Verbose OpcLabs.EasyOpc.UA.UAClientSession</code>
: <code>uaClient subscribe //opcua.demo-this.com:51210/UA/SampleServer nsu=http://test.org/UA/Data/;i=10849 !wait 01:00:00</code>
: <code>uaClient subscribe %(endpoint) nsu=http://test.org/UA/Data/;i=10849 !wait 01:00:00</code>
: <code>traceEntries?</code>
: <code>traceEntries?</code>
; Client and Servers recover from long network-interruption, i.e. 1-minute.
; Client and Servers recover from long network-interruption, i.e. 1-minute.
: Example:
: Example:
: <code>uaClient subscribe //opcua.demo-this.com:51210/UA/SampleServer nsu=http://test.org/UA/Data/;i=10849 !wait 01:00:00</code>
: <code>uaClient subscribe %(endpoint) nsu=http://test.org/UA/Data/;i=10849 !wait 01:00:00</code>


= Reverse Connect =
= Reverse Connect =
Server sends the ReverseHello message to the Client and Client successfully establishes a connection to the Server.
; Server sends the ReverseHello message to the Client and Client successfully establishes a connection to the Server.
 
: (tbd)
After a connection break, the Server sends a new ReverseHello message to the Client to allow it to reestablish the connection.
; After a connection break, the Server sends a new ReverseHello message to the Client to allow it to reestablish the connection.
: (tbd)


= Sessionless Services =
= Sessionless Services =
Use Browse via a Sessionless Service call
; Use Browse via a Sessionless Service call
Use BrowseNext via a Sessionless Service call
: (tbd)
Use TranslateBrowsePathsToNodeIds via a Sessionless Service call
; Use BrowseNext via a Sessionless Service call
Use Read via a Sessionless Service call
: (tbd)
Use HistoryRead via a Sessionless Service call
; Use TranslateBrowsePathsToNodeIds via a Sessionless Service call
Use Write via a Sessionless Service call
: (tbd)
Use HistoryUpdate via a Sessionless Service call
; Use Read via a Sessionless Service call
Use Call via a Sessionless Service call
: (tbd)
Use AddNodes via a Sessionless Service call
; Use HistoryRead via a Sessionless Service call
Use AddReferences via a Sessionless Service call
: (tbd)
Use DeleteNodes via a Sessionless Service call
; Use Write via a Sessionless Service call
Use DeleteReferences via a Sessionless Service call
: (tbd)
Use QueryFirst via a Sessionless Service call
; Use HistoryUpdate via a Sessionless Service call
Use QueryNext via a Sessionless Service call
: (tbd)
; Use Call via a Sessionless Service call
: (tbd)
; Use AddNodes via a Sessionless Service call
: (tbd)
; Use AddReferences via a Sessionless Service call
: (tbd)
; Use DeleteNodes via a Sessionless Service call
: (tbd)
; Use DeleteReferences via a Sessionless Service call
: (tbd)
; Use QueryFirst via a Sessionless Service call
: (tbd)
; Use QueryNext via a Sessionless Service call
: (tbd)


= GDS =
= GDS =
[obsolete] Application registers itself using the RegisterApplication method of the GDS.
; [obsolete] Application registers itself using the RegisterApplication method of the GDS.
[obsolete] Application updates its information using the UpdateApplication method of the GDS.
: (tbd)
[obsolete] Application unregisters itself using the UnregisterApplication method of the GDS.
; [obsolete] Application updates its information using the UpdateApplication method of the GDS.
[obsolete] Application gets a list from the GDS with all registered applications.
: (tbd)
[obsolete] Application gets a filtered list from the GDS with all registered applications matching its query.
; [obsolete] Application unregisters itself using the UnregisterApplication method of the GDS.
[obsolete] Pull Management - Certificate Update: Application receives a new certificate via the pull management interface.
: (tbd)
[obsolete] Pull Management - Revoke Certificate: Application revokes a certificate.
; [obsolete] Application gets a list from the GDS with all registered applications.
[obsolete] Pull Management - GetCertificateGroups: Application gets the list of instances of the CertificateGroupType in the server.
: (tbd)
[obsolete] Pull Management - GetTrustList: Application gets its Trust Lists.
; [obsolete] Application gets a filtered list from the GDS with all registered applications matching its query.
[obsolete] Pull Management - GetCertificateStatus: Application checks whether its certificate needs to be updated.
: (tbd)
Push Management - UpdateCertificate: Application receives and uses a new certificate.
; [obsolete] Pull Management - Certificate Update&#x003A; Application receives a new certificate via the pull management interface.
Push Management - CreateSigningRequest: Application generates a signing request as a result for the CreateSigningRequest.
: Example:
Push Management - GetRejectedList: GDS receives the rejected list from the Application.
: <code>uaClient getService uaClientServerApplication removeOwnCertificates</code>
Push Management - ResetToServerDefaults: Application resets its configuration.
: <code>uaClient getService uaClientServerApplication obtainNewCertificate %(endpoint) --EndpointAllowedMessagedSecurity SecuritySignAndEncrypt --EndpointUser appadmin:demo</code>
Push Management - SetAdminPassword: Application updates the password for the specified user.
; [obsolete] Pull Management - Revoke Certificate&#x003A; Application revokes a certificate.
Push Management - AddEndpoint: Application adds the specified Endpoint
: (tbd)
Push Management - RemoveEndpoint: Application removes the specified Endpoint
; [obsolete] Pull Management - GetCertificateGroups&#x003A; Application gets the list of instances of the CertificateGroupType in the server.
Push Management - AddUserTokenPolicy: Application adds the specified UserToken.
: (tbd)
[obsolete] Push Management - RemoveUserTokenPolicy: Application removes the specified UserToken
; [obsolete] Pull Management - GetTrustList&#x003A; Application gets its Trust Lists.
: (tbd)
; [obsolete] Pull Management - GetCertificateStatus&#x003A; Application checks whether its certificate needs to be updated.
: (tbd)
; Push Management - UpdateCertificate&#x003A; Application receives and uses a new certificate.
: (tbd)
; Push Management - CreateSigningRequest&#x003A; Application generates a signing request as a result for the CreateSigningRequest.
: (tbd)
; Push Management - GetRejectedList&#x003A; GDS receives the rejected list from the Application.
: (tbd)
; Push Management - ResetToServerDefaults&#x003A; Application resets its configuration.
: (tbd)
; Push Management - SetAdminPassword&#x003A; Application updates the password for the specified user.
: (tbd)
; Push Management - AddEndpoint&#x003A; Application adds the specified Endpoint
: (tbd)
; Push Management - RemoveEndpoint&#x003A; Application removes the specified Endpoint
: (tbd)
; Push Management - AddUserTokenPolicy&#x003A; Application adds the specified UserToken.
: (tbd)
; [obsolete] Push Management - RemoveUserTokenPolicy&#x003A; Application removes the specified UserToken
: (tbd)
 
= (To Be Filed) =
; Application gets a list from the GDS with all registered applications.
: <code>uaClient discover globalApplications %(endpoint)</code>

Latest revision as of 16:45, 12 March 2024

This article is mainly for internal usage.

Test preparation - example: !variable set endpoint opc.tcp://opcua.demo-this.com:51210/UA/SampleServer

Session

CreateSession() over an insecure channel with UA TCP and SecurityPolicy =None
Example: uaClient read %(endpoint) i=2255 --EndpointAllowedMessagedSecurity SecurityNone
CreateSession() over a secure channel with UA TCP and SecurityPolicy=Basic128Rsa15 where the key length is minimum 2048.
Example: uaClient read %(endpoint) i=2255 --EndpointSecurityPolicyDisplayName Basic128Rsa15
ActivateSession() with user identity = username/password
Example: uaClient read opc.tcp://opcua.demo-this.com:58810/GlobalDiscoveryServer i=2255 --EndpointUser appadmin:demo
ActivateSession() with user identity = anonymous
Example: uaClient read %(endpoint) i=2255 --EndpointAnonymous True
However, the anonymous identity is the default, and as such is used in other tests unless other identity is explicitly specified.
ActivateSession - change user in an existing session.
Not supported (by API).
Use CloseSession() to end session. If possible, verify that the following service calls to the session are rejected.
Example:
uaClient --!option AmbientOutput=[Boolean]True --ConnectionMonitoring
read %(endpoint) i=2255
!option UserBreak [Boolean]False
!wait 00:00:15
exit
Create and use multiple sessions.
Example:
!option AmbientOutput [Boolean]True
uaClient --ConnectionMonitoring
getService uaClientConnectionControl lockConnection %(endpoint)
/uaClient --ConnectionMonitoring read %(endpoint) i=2255
exit
CreateSession() with an application instance certificate
Example: uaClient read %(endpoint) i=2255 --EndpointAllowedMessagedSecurity Secure
CreateSession() over a secure channel with HTTPS and SecurityPolicy =None.
Example: uaClient read https://opcua.demo-this.com:51212/UA/SampleServer i=2255 --EndpointAllowedMessagedSecurity SecurityNone
ActivateSession() with user identity = X509 certificate
Example: uaClient read %(endpoint) i=2255 --EndpointCertificateFileName MyCertificate.pfx
CreateSession() over a secure channel with UA TCP and SecurityPolicy=Basic256Sha256
Example: uaClient read %(endpoint) i=2255 --EndpointSecurityPolicyDisplayName Basic256Sha256
CreateSession() over a secure channel with UA TCP and SecurityPolicy=Aes128-Sha256-RsaOaep
Example: uaClient read %(endpoint) i=2255 --EndpointSecurityPolicyDisplayName Aes128-Sha256-RsaOaep
CreateSession() over a secure channel with UA TCP and SecurityPolicy=Aes256-Sha256-RsaPss
Example: uaClient read %(endpoint) i=2255 --EndpointSecurityPolicyDisplayName Aes256-Sha256-RsaPss
ActivateSession() with user identity = Issued Token - OAuth2
(tbd)
ActivateSession() with user identity = Issued Token - JSON Web Token (JWT)
(tbd)
CreateSession() over a secure channel with UA TCP and SecurityPolicy=ECC-nistP256
(tbd)
CreateSession() over a secure channel with UA TCP and SecurityPolicy=ECC-nistP384
(tbd)
CreateSession() over a secure channel with UA TCP and SecurityPolicy=ECC-brainpoolP256r1
(tbd)
CreateSession() over a secure channel with UA TCP and SecurityPolicy=ECC-brainpoolP384r1
(tbd)
CreateSession() over a secure channel with UA TCP and SecurityPolicy=ECC-curve25519
(tbd)
CreateSession() over a secure channel with UA TCP and SecurityPolicy=ECC-curve448
(tbd)

View Services

Call Browse() on a single node in the address space. Repeat with other nodes.
Example: uaClient browse %(endpoint)
Example: uaClient browse %(endpoint) --NodeStandardName Objects
Call Browse() by specifying more than one node in a single call. Walk through the address space.
Specifying more than one node in a single call: Not supported (by OpcCmd).
Example - Walk through the address space:
uaClient browse %(endpoint) --BrowseParametersStandardName AllHierarchicalReferences --tree
Call Browse() using various Reference filters; e.g. only hierarchical references.
Example: uaClient browse %(endpoint) --BrowseParametersStandardName AllHierarchicalReferences
Example: uaClient browse %(endpoint) --NodeStandardName Objects --BrowseParametersStandardName AllHierarchicalReferences
Call Browse() using various NodeClass filters (e.g. to return Variable nodes only).
Example: uaClient browse %(endpoint) --NodeStandardName Server --NodeClasses Variable
Example: uaClient browse %(endpoint) --NodeStandardName Server --BrowseParametersStandardName DataNodes
Call Browse() with a filter to reduce the result information (e.g. omit BrowseName and ReferenceType).
Not supported (by API).
[obsolete] BrowseNext (Continuation Point)
Example:
uaClient
set IsolatedParameters.SessionParameters.MaximumReferencesPerBrowseNode [Int32]1
browse %(endpoint) --NodeStandardName Server
exit
TranslateBrowsePathToNodeId to determine the NodeID of components (e.g. properties)
Example: uaClient read %(endpoint) --NodeBrowsePath [Server]/0:NamespaceArray
[obsolete] TranslateBrowsePathToNodeId for non-hierarchical References
Not supported (no test due to obsolescence).
Register()/UnregisterNodes() for one or more standard UA-defined Nodes (e.g. "Server") in a single call.
Example:
!diagnostics sources setSwitchValue Verbose OpcLabs.EasyOpc.UA.UAClientSession
uaClient
:: Lock the connection so that the node registration takes effect immediately.
getService uaClientConnectionControl lockConnection %(endpoint)
getService uaClientNodeRegistration registerNode %(endpoint) --NodeStandardName Server_ServerDiagnostics_ServerDiagnosticsSummary_CumulatedSessionCount
!variable let registrationHandle %~
!option UserBreak [Boolean]False
!wait 00:00:05
read %(endpoint) --NodeStandardName Server_ServerDiagnostics_ServerDiagnosticsSummary_CumulatedSessionCount
getService uaClientNodeRegistration unregisterNode %(registrationHandle)
exit
:: If the server had truly registered the node, it will be counted as "transcribed" in the node registration trace entry below.
!diagnostics trace entries? --source OpcLabs.EasyOpc.UA.UAClientSession
Register()/UnregisterNodes() for one or more vendor-defined Nodes in a single call.
Example:
!diagnostics sources setSwitchValue Verbose OpcLabs.EasyOpc.UA.UAClientSession
uaClient
:: Lock the connection so that the node registration takes effect immediately.
getService uaClientConnectionControl lockConnection %(endpoint)
getService uaClientNodeRegistration registerNode %(endpoint) nsu=http://samples.org/UA/memorybuffer/Instance;s=UInt32[0]
!variable let registrationHandle %~
!option UserBreak [Boolean]False
!wait 00:00:05
read %(endpoint) nsu=http://samples.org/UA/memorybuffer/Instance;s=UInt32[0]
getService uaClientNodeRegistration unregisterNode %(registrationHandle)
exit
:: If the server had truly registered the node, it will be counted as "transcribed" in the node registration trace entry below.
!diagnostics trace entries? --source OpcLabs.EasyOpc.UA.UAClientSession
Browse with Views.
Not supported (by API).

Attribute Services

Read() attributes - as supported by the Client - for a standard UA-defined node (e.g. "Server"). Repeat with other nodes.
Example:
uaClient read %(endpoint) --NodeStandardName Server_ServerStatus_State
uaClient read %(endpoint) --NodeStandardName Server_ServerDiagnostics_EnabledFlag
uaClient read %(endpoint) --NodeStandardName Server_ServerStatus
Read() all supported attributes for a given vendor node in a single call. Vary the vendor nodes.
Example:
uaClient read %(endpoint) ns=2;i=10219 multiple --attributeId *
uaClient read %(endpoint) ns=2;i=10854 multiple --attributeId *
Read() all supported attributes on a given node while specifying a MaxAge value.
Example:
uaClient read %(endpoint) ns=2;i=10219 --MaximumAge 1000 multiple --attributeId *
uaClient read %(endpoint) ns=2;i=10854 --MaximumAge 1000 multiple --attributeId *
Read() the value attribute while specifying an encoding (not "default"). Vary the encoding.
Not supported (by API).
Read() a value that is an array while varying the IndexRange to include specific indexes, the first X, the last X, the middle X. Vary the number of dimensions (e.g. "1:2,1:2" or "1:2,1:2,1:2" etc.) - if available.
Example:
uaClient read %(endpoint) i=2255 Value 0:1
uaClient read %(endpoint) "nsu=http://test.org/UA/Data/ ;ns=2;i=10303" Value 2
uaClient read %(endpoint) "nsu=http://test.org/UA/Data/ ;ns=2;i=10303" Value 1:2,1:2
uaClient read %(endpoint) "nsu=http://test.org/UA/Data/ ;ns=2;i=10939" Value 1:2
uaClient read %(endpoint) "nsu=http://test.org/UA/Data/ ;ns=2;i=10939" Value 1:2,1:2
Write() one or more Value attributes (WriteAccess permitted) for one or more nodes in a single call. Vary nodes.
Example:
uaClient write %(endpoint) nsu=http://test.org/UA/Data/;i=10221 [Int32]3141
uaClient read %(endpoint) nsu=http://test.org/UA/Data/;i=10221
uaClient write %(endpoint) nsu=http://test.org/UA/Data/;i=10474 [String[]]{first,second,third}
uaClient read %(endpoint) nsu=http://test.org/UA/Data/;i=10474
Write() a value that is an array using the IndexRange to vary the number of elements, e.g. all, first X, last X, middle X. Repeat for multi-dimension arrays, if available.
Example:
uaClient write %(endpoint) nsu=http://test.org/UA/Data/;i=10302 [Byte[]]{42,43,44} Value 2:4
uaClient read %(endpoint) nsu=http://test.org/UA/Data/;i=10302
uaClient write %(endpoint) nsu=http://test.org/UA/Data/;i=10474 [String[]]{first,second,third}
uaClient write %(endpoint) nsu=http://test.org/UA/Data/;i=10474 [String[]]{new2} Value 1
uaClient read %(endpoint) nsu=http://test.org/UA/Data/;i=10474
Read() a Value that is a structured DataType, use vendor specific structures if possible.
(tbd)
Write() a Value that is a structured DataType, use vendor specific structures if possible.
(tbd)

Method Services

Call() a method defined by the vendor (not any of the OPC UA defined methods). Vary the methods to ensure different method signatures are covered, e.g. no parameters, in-parameters only, out-parameters only, in and out parameters etc.
Example: uaClient call %(endpoint) nsu=http://test.org/UA/Data/;i=10755 nsu=http://test.org/UA/Data/;i=10756 [Boolean]False [SByte]1 [Byte]2 [Int16]3 [UInt16]4 [Int32]5 [UInt32]6 [Int64]7 [UInt64]8 [Float]9 [Double]10
Call() a Method that uses a structured DataType as Input- or Output-Arguments, use a Method with a vendor specific structure if possible.
(tbd)

Information Model

Browse() for standard folders: Objects, Types, ReferenceTypes, ObjectTypes, VariableTypes, DataTypes, and Views.
Example:
uaClient browse %(endpoint) --NodeStandardName ObjectsFolder
uaClient browse %(endpoint) --NodeStandardName TypesFolder
uaClient browse %(endpoint) --NodeStandardName ReferenceTypesFolder
uaClient browse %(endpoint) --NodeStandardName ObjectTypesFolder
uaClient browse %(endpoint) --NodeStandardName VariableTypesFolder
uaClient browse %(endpoint) --NodeStandardName DataTypesFolder
uaClient browse %(endpoint) --NodeStandardName ViewsFolder
Browse() the Types folder and verify standard types are exposed, e.g. BaseObjectType, FolderType, Reference Types, Data Types (scalar types and standard structures).
Example:
uaClient browse %(endpoint) --NodeStandardName TypesFolder --BrowseDirections Forward --ReferenceTypeId i=35 --ReferenceTypeId i=45 --tree
Browse() the Server Object for ServerCapabilities, ServerDiagnostics, ServerStatus, VendorServerInfo, and any other standardized components.
Example:
uaClient browse %(endpoint) --NodeStandardName Server
Browse() the ServerDiagnostics.SessionDiagnosticsArray and verify the Client connection and its details can be read
Example:
uaClient browse %(endpoint) --NodeStandardName Server_ServerDiagnostics
uaClient browse %(endpoint) --NodeStandardName Server_ServerDiagnostics_SessionsDiagnosticsSummary
uaClient read %(endpoint) --NodeStandardName Server_ServerDiagnostics_SessionsDiagnosticsSummary_SessionDiagnosticsArray

Subscription Services

[obsolete] Create empty Subscription
Not supported (by API).
Modify an existing subscription by varying subscription properties (e.g. publishingInterval and keepAlive etc.) and verify subscription behavior.
Not supported (by OpcCmd).
Delete an existing Subscription
Example:
!diagnostics sources setSwitchValue Verbose OpcLabs.EasyOpc.UA.UAClientSession
!option UserBreak [Boolean]False
uaClient subscribe %(endpoint) nsu=http://test.org/UA/Data/;i=10849 !wait 5000
traceEntries?
In the trace entries, look for an entry from "UAClientSession" indicating SDK subscription remove success or failure.
SetPublishingMode() to enable/disable publishing. Test with multiple subscriptions if available.
Not supported (by API).
[obsolete] Publish Service to request attribute value changes
Not supported (not clear).
Publish() returns after keep-alive interval (no data-changes; hint: subscribe to static items).
Example:
uaClient
set IsolatedParameters.SubscriptionParameters.KeepAliveCount [Int32]1
subscribe %(endpoint) nsu=http://test.org/UA/Data/;i=10393
If the keep-alive fails, there would be an additional event with the error
Issue multiple Publish() requests that are to be queued by the Server.
Not supported (by API).
[obsolete] Republish Service
Not supported (by API).
Create subscriptions with varying number of monitored items and different rate settings as supported by the client. Verify that the server provides updates according to the specified publishing rate. Optionally use Write() service to trigger data changes.
Example:
uaClient subscribe %(endpoint) --NodeStandardName Server_ServerStatus_CurrentTime --Aggregates StateStatistics
uaClient subscribe %(endpoint) nsu=http://test.org/UA/Data/;i=10849 --Aggregates StateStatistics multiple
uaClient subscribe %(endpoint) nsu=http://test.org/UA/Data/;i=10849 200 --Aggregates StateStatistics multiple

Redundancy

TransferSubscription() to change ownership of a subscription to another Client.
Not supported (by API).
Successfully switched to exposed transparent redundant server
(tbd)
Successfully switched to exposed non-transparent redundant server
(tbd)

Eventing

Subscribe to the Server Object's EventNotifier attribute. Specify some basic event fields in the select clause. Verify that events are notified.
Not supported (by OpcCmd).
Subscribe with a filter for EventType, Priority etc. Verify that events match the filter criteria.
Not supported (by OpcCmd).
[obsolete] Publish Service delivers event notifications matching the filter.
Not supported (by OpcCmd).
Browse the address space for other nodes that support event subscriptions (other than the Server object). Subscribe to any of these.
Example:
uaClient browse %(endpoint) --NodeStandardName Server --BrowseDirections Forward --ReferenceTypeId i=36 --tree
Receiving all supported Audit events
(tbd)

Data Change

Add Monitored Items (value attribute of variables)
Example:
uaClient subscribe %(endpoint) nsu=http://test.org/UA/Data/;i=10849 multiple --repeat 2
Modify the state of One or more monitored items in a single SetMonitoringMode() call, e.g. disabled, reporting, or sampling.
Not supported (by API).
[obsolete] Enable / disable publishing
Not supported (by API).
Create a trigger (SetTriggering()) to configure linked items. Verify that linked items are reported when the triggering item changes.
Not supported (by API).
Absolute Deadband filter.
Example:
uaClient subscribe %(endpoint) nsu=http://test.org/UA/Data/;i=10853 200 --DeadbandType Absolute --DeadbandValue 1E10
Modify an existing trigger (SetTriggering()) by adding/removing items to/from the trigger. Verify behavior.
Not supported (by API).

Node Management

Add one or more nodes in a single AddNodes() call. Verify address-space for changes.
Not supported (by API).
Delete one or more nodes in a single DeleteNodes() call. Verify address-space for changes.
Not supported (by API).
Add one or more references in a single AddReferences() call. Verify address-space for changes.
Not supported (by API).
Delete one or more references in a single DeleteReferences() call. Verify address-space for changes.
Not supported (by API).

Alarm and Condition

Browse() the Types folder for supported Alarm types and Condition types.
Example:
uaClient browse %(endpoint) --NodeStandardName BaseEventType --BrowseDirections Forward --ReferenceTypeId i=45 --tree
Call CreateMonitoredItems() for an Event Notifier. Specify event fields to be returned. Specify a simple filter (e.g. if (Severity > 400)). Vary the selection and the filter.
Not supported (by OpcCmd).
[obsolete] Publish service delivers Alarm and Condition events
Not supported (by OpcCmd).
Call ConditionRefresh for a subscription while at least one Condition is in an interesting state (e.g. an Alarm is active). Verify that this Condition state is reported.
Not supported (by OpcCmd).
Modify the state of a Condition by calling the Enable/Disable methods. Verify the reporting behaviour.
Not supported (by OpcCmd).
Call the Acknowledge Method for an Alarm that requires acknowledgement.
Not supported (by OpcCmd).
Call the Confirm Method for an Alarm that requires confirmation.
Not supported (by OpcCmd).
[obsolete] Dialog Condition including Respond Method
Not supported (by OpcCmd).

Historical Access

Historical Raw Data Facet -- basic historical access, ReadRaw. Where the time range is specified using a start time, stop time and number of values (a minimum of two of the three).
Not supported (by API).
Historical Raw Data Facet -- support minimum 2 continuation points
Not supported (by API).
HistoricalDataAtTime Server Facet -- Support reading historical data at a specified instance in time.
Not supported (by API).
HistoricalModifiedData Server Facet -- Supports maintaining old values for historical data that have been updated and the retrieval of these values.
Not supported (by API).
HistoricalAnnotation Server Facet -- Supports the entry and retrieval of annotations for historical data using the standard historical read raw functionality.
Not supported (by API).
HistoricalDataUpdate Server Facet -- Support Insert, Delete and Replace.
Not supported (by API).
HistoricalStructuredData Server Facet -- Support historical access for structured data. IF this is support structured data must be supported for all other historical conformance units (i.e. read raw, read at time etc).
Not supported (by API).
AggregateHistorical Server Facet -- Support historical read with aggregates
Not supported (by API).
EnhancedHistoricalData Server Facet -- Support at least 5 Continuation Points; support providing a ServerTimestamp in addition to the SourceTimestamp.
Not supported (by API).
BaseHistoricalEvent Server Facet -- Support retrieval of historical Events. This includes support for simple filtering of events.
Not supported (by API).
EnhancedHistoricalEvent Server Facet -- Support Insert, Replace, Update; support at least 5 continuation points.
Not supported (by API).

Discovery

Call FindServers() on a remote LDS and specify a ServerURI to get a specific Server application.
Not supported (by API).
Call GetEndpoints() on the Server application that is the testee. Specify the desired transport profile in the request. Verify that only endpoints are returned that include this profile.
Not supported (by API).
Call FindServers() on a remote LDS to get the list of available Server applications. Verify that the Server application that is the testee is in this list.
Example:
uaClient discover localApplications opcua.demo-this.com
Call GetEndpoints() on the Server application that is the testee.
Example:
uaClient read %(endpoint) --NodeStandardName Server_ServerCapabilities_MaxArrayLength
The ability to create a session in this way is a proof of test success here

Challenge

Connect to multiple products in parallel, each with 10 or more items (more is better).
Not supported (by OpcCmd).
Client and Servers recover from short network-interruption, i.e. 10-seconds. Session is not closed, Subscriptions continue to send notifications.
Example:
!diagnostics sources setSwitchValue Verbose OpcLabs.EasyOpc.UA.UAClientSession
uaClient subscribe %(endpoint) nsu=http://test.org/UA/Data/;i=10849 !wait 01:00:00
traceEntries?
Client and Servers recover from long network-interruption, i.e. 1-minute.
Example:
uaClient subscribe %(endpoint) nsu=http://test.org/UA/Data/;i=10849 !wait 01:00:00

Reverse Connect

Server sends the ReverseHello message to the Client and Client successfully establishes a connection to the Server.
(tbd)
After a connection break, the Server sends a new ReverseHello message to the Client to allow it to reestablish the connection.
(tbd)

Sessionless Services

Use Browse via a Sessionless Service call
(tbd)
Use BrowseNext via a Sessionless Service call
(tbd)
Use TranslateBrowsePathsToNodeIds via a Sessionless Service call
(tbd)
Use Read via a Sessionless Service call
(tbd)
Use HistoryRead via a Sessionless Service call
(tbd)
Use Write via a Sessionless Service call
(tbd)
Use HistoryUpdate via a Sessionless Service call
(tbd)
Use Call via a Sessionless Service call
(tbd)
Use AddNodes via a Sessionless Service call
(tbd)
Use AddReferences via a Sessionless Service call
(tbd)
Use DeleteNodes via a Sessionless Service call
(tbd)
Use DeleteReferences via a Sessionless Service call
(tbd)
Use QueryFirst via a Sessionless Service call
(tbd)
Use QueryNext via a Sessionless Service call
(tbd)

GDS

[obsolete] Application registers itself using the RegisterApplication method of the GDS.
(tbd)
[obsolete] Application updates its information using the UpdateApplication method of the GDS.
(tbd)
[obsolete] Application unregisters itself using the UnregisterApplication method of the GDS.
(tbd)
[obsolete] Application gets a list from the GDS with all registered applications.
(tbd)
[obsolete] Application gets a filtered list from the GDS with all registered applications matching its query.
(tbd)
[obsolete] Pull Management - Certificate Update: Application receives a new certificate via the pull management interface.
Example:
uaClient getService uaClientServerApplication removeOwnCertificates
uaClient getService uaClientServerApplication obtainNewCertificate %(endpoint) --EndpointAllowedMessagedSecurity SecuritySignAndEncrypt --EndpointUser appadmin:demo
[obsolete] Pull Management - Revoke Certificate: Application revokes a certificate.
(tbd)
[obsolete] Pull Management - GetCertificateGroups: Application gets the list of instances of the CertificateGroupType in the server.
(tbd)
[obsolete] Pull Management - GetTrustList: Application gets its Trust Lists.
(tbd)
[obsolete] Pull Management - GetCertificateStatus: Application checks whether its certificate needs to be updated.
(tbd)
Push Management - UpdateCertificate: Application receives and uses a new certificate.
(tbd)
Push Management - CreateSigningRequest: Application generates a signing request as a result for the CreateSigningRequest.
(tbd)
Push Management - GetRejectedList: GDS receives the rejected list from the Application.
(tbd)
Push Management - ResetToServerDefaults: Application resets its configuration.
(tbd)
Push Management - SetAdminPassword: Application updates the password for the specified user.
(tbd)
Push Management - AddEndpoint: Application adds the specified Endpoint
(tbd)
Push Management - RemoveEndpoint: Application removes the specified Endpoint
(tbd)
Push Management - AddUserTokenPolicy: Application adds the specified UserToken.
(tbd)
[obsolete] Push Management - RemoveUserTokenPolicy: Application removes the specified UserToken
(tbd)

(To Be Filed)

Application gets a list from the GDS with all registered applications.
uaClient discover globalApplications %(endpoint)