OpcLabs.Mqtt communication package

From OPC Labs Knowledge Base
Revision as of 20:17, 12 December 2019 by User (talk | contribs)

OpcLabs.Mqtt

Specifying the communication package

In order to select this communication package in OPC UA PubSub tools, you need to set a custom property on a PubSub connection as follows:

  • Property namespace: http://opclabs.com/OpcUA/PubSub
  • Property name: MessageChannel!
  • Property datatype: String
  • Property value: OpcLabs.Mqtt.MqttClientMessageChannel,OpcLabs.Mqtt

How this is done depends on the concrete software you are using.

EasyUASubscriber object

OpcCmd tool

UADemoPublisher tool

Configuring the communication package

ClientWaitTimeout System.Int32
ErrorWaitDelay System.Int32
MqttConfiguration System.Net.Mqtt.MqttConfiguration General configuration used across the protocol implementation.
MqttConfiguration.AllowWildcardsInTopicFilters System.Boolean Determines if multi level (#) and single level (+) wildcards are allowed on topic filters. Default value is true.
MqttConfiguration.BufferSize System.Int32 Size in bytes of the receive buffer of the underlying transport protocol. Only use it when the property applies to the undelrying protocol used.
MqttConfiguration.ConnectionTimeoutSecs System.Int32 Seconds to wait for a channel connection until the operation timeouts. This value is generally used to wait for the MQTT channel to open. Default value is 5 seconds.
MqttConfiguration.KeepAliveSecs System.UInt16 Seconds to wait for the MQTT Keep Alive mechanism until a Ping packet is sent to maintain the connection alive. Default value is 0 seconds, which means Keep Alive disabled.
MqttConfiguration.MaximumQualityOfService System.Net.Mqtt.MqttQualityOfService Maximum Quality of Service (QoS) to support. Default value is AtMostOnce, which means QoS 0.
MqttConfiguration.Port System.Int32 Port to connect a Client to a Server.
MqttConfiguration.WaitTimeoutSecs System.Int32 Seconds to wait for an incoming required message until the operation timeouts. This value is generally used to wait for Server or Client acknowledgements. Default value is 5 seconds.
OpenFailureWaitDelay System.Int32
RemoteDisconnectedWaitDelay System.Int32