Certificate security plugin

Principles of operation

Warning: The Certificate security plugin is not used with OPC UA Client-Server certificates, because of the special needs of OPC UA Client-Server security. Its use is for other purposes, such as secured MQTT communications in OPC UA PubSub.

Certificate security providers

Composed

Order	Enabled by	Parameterized by	Description
1	AllowStatic	StaticCertificateSecurityParameters
2	AllowHandler
3	AllowInteractive

In the table below, "the consumer" is the part of the software that has requested the certificate security operation. In might be e.g. one of the MQTT communication packages.

AllowStatic setting	AllowInteractive setting	Get local certificates	Validate remote certificate
False	False	The consumer will use its default behavior for obtaining local certificates.	The consumer will use its default behavior for validating the remote certificate.
False	True	The user is allowed to supply the local certificates (depending on the capabilities of the interaction provider), or use the provided defaults. The default local certificates for the interaction are given by the StaticCertificateSecurityParameters.LocalCertificatesQuery setting (even though AllowStatic is set False).	The user is allowed to accept or reject the remote certificate.
True	False	Local certificates are obtained according to StaticCertificateSecurityParameters.LocalCertificatesQuery setting (certificates can be read from certificate files, and/or looked up according to specified criteria in a certificate store). The default LocalCertificatesQuery returns no local certificates.	The remote certificate is accepted if it complies with the StaticCertificateSecurityParameters.RemoteCertificateAcceptancePolicy setting.
True	True		The remote certificate is accepted if it complies with the StaticCertificateSecurityParameters.RemoteCertificateAcceptancePolicy setting. Otherwise, the user is allowed to accept or reject the remote certificate.

Static

The Static certificate security provider does not distinguish between (ignores) the different purposes of the operation (such as that the local certificates may be provided for MQTT, or for AMQP), and also different targets (for which server are the local certificates intended, or from which server the remote certificate came). If you need that level of granularity, use the Handler certificate security provider (and make the distinction in your code), or the Interaction certificate security provider (and let the end user make the decisions).

Interactive

User responses are memoized for the lifetime of the process (application domain in .NET Framework). That is, the user will not be asked the same question for the same combination of inputs (e.g. validating the same remote certificate for the same purpose and from the same server).

Console

Local certificates for: MQTT client connection to mqtts://test.mosquitto.org (MqttNet)
Supply local certificate(s) for authentication to mqtts://test.mosquitto.org .
There are 0 default certificates.
Certificate file name (Enter=default certificates)? client.crt
Loaded certificate: OU=Software Engineering, S=PM, O="CODE Consulting and Development, s.r.o.", L=Plzen, CN=opclabs.com, C=CZ

Validate remote certificate for: MQTT client connection to mqtts://test.mosquitto.org (MqttNet)
The identity of the remote computer cannot be verified. Do you want to connect anyway?
The remote computer could not be authenticated due to problems with its security certificate. It may be unsafe to proceed.
Information:
  Target: mqtts://test.mosquitto.org
  Associated status: Certificate chain errors.
  
  Subject: CN=test.mosquitto.org, OU=Public server, O=Mosquitto, L=Derby, S=United Kingdom, C=GB
  Issuer: E=roger@atchoo.org, CN=mosquitto.org, OU=CA, O=Mosquitto, L=Derby, S=United Kingdom, C=GB
  Valid from: 3/20/2019 3:21:39 PM
  Valid to: 3/16/2032 3:21:39 PM
  Thumbprint: E62D6F0D957ED20B74B1D55D404EEF992CE482F0

Do you want to accept the certificate anyway? [y/N]: Y

Usage

In command-line tools

Options:
  -x-cs-ai|--X-CertificateSecurity-AllowInteraction <bool>                    Certificate security: Allow interaction (default True)
  -x-cs-as|--X-CertificateSecurity-AllowStatic <bool>                         Certificate security: Allow static (default True)
  -x-cs-lcfn|--X-CertificateSecurity-LocalCertsFileName <string>              Certificate security: Local certs: File name (*)
  -x-cs-lcfv|--X-CertificateSecurity-LocalCertsFindValue <string>             Certificate security: Local certs: Find value
  -x-cs-lcsl|--X-CertificateSecurity-LocalCertsStoreLocation <storeLocation>  Certificate security: Local certs: Store location (default CurrentUser)
  -x-cs-lcsn|--X-CertificateSecurity-LocalCertsStoreName <storeName>          Certificate security: Local certs: Store name (default My)
  -x-cs-lcft|--X-CertificateSecurity-LocalCertsFindType <findType>            Certificate security: Local certs: Find type (default FindByThumbprint)
  -x-cs-lcst|--X-CertificateSecurity-LocalCertsSourceTypes <sourceTypes>      Certificate security: Local certs: Source types
  -x-cs-rpaa|--X-CertificateSecurity-RemotePolicyAcceptAny <bool>             Certificate security: Remote policy: Accept any certificate

Parameter values:
  <findType>        FindByThumbprint/FindBySubjectName/FindBySubjectDistinguishedName/FindByIssuerName/FindByIssuerDistinguishedName/FindBySerialNumber/FindByTimeValid/FindByTimeNotYetValid/FindByTimeExpired/FindByTemplateName/FindByApplicationPolicy/FindByCertificatePolicy/FindByExtension/FindByKeyUsage/FindBySubjectKeyIdentifier
  <sourceTypes>     None/File/PkiStore[,None/File/PkiStore]...
  <storeLocation>   CurrentUser/LocalMachine
  <storeName>       AddressBook/AuthRoot/CertificateAuthority/Disallowed/My/Root/TrustedPeople/TrustedPublisher