OpcLabs.Mqtt communication package
From OPC Labs Knowledge Base
OpcLabs.Mqtt
Configuration
| ClientWaitTimeout | System.Int32 | |
| ErrorWaitDelay | System.Int32 | |
| MqttConfiguration | System.Net.Mqtt.MqttConfiguration | General configuration used across the protocol implementation. |
| MqttConfiguration.AllowWildcardsInTopicFilters | System.Boolean | Determines if multi level (#) and single level (+) wildcards are allowed on topic filters. Default value is true. |
| MqttConfiguration.BufferSize | System.Int32 | Size in bytes of the receive buffer of the underlying transport protocol. Only use it when the property applies to the undelrying protocol used. |
| MqttConfiguration.ConnectionTimeoutSecs | System.Int32 | Seconds to wait for a channel connection until the operation timeouts. This value is generally used to wait for the MQTT channel to open. Default value is 5 seconds. |
| MqttConfiguration.KeepAliveSecs | System.UInt16 | Seconds to wait for the MQTT Keep Alive mechanism until a Ping packet is sent to maintain the connection alive. Default value is 0 seconds, which means Keep Alive disabled. |
| MqttConfiguration.MaximumQualityOfService | System.Net.Mqtt.MqttQualityOfService | Maximum Quality of Service (QoS) to support. Default value is AtMostOnce, which means QoS 0. |
| MqttConfiguration.Port | System.Int32 | Port to connect a Client to a Server. |
| MqttConfiguration.WaitTimeoutSecs | System.Int32 | Seconds to wait for an incoming required message until the operation timeouts. This value is generally used to wait for Server or Client acknowledgements. Default value is 5 seconds. |
| OpenFailureWaitDelay | System.Int32 | |
| RemoteDisconnectedWaitDelay | System.Int32 |
